Single Door Enclosure
APXSM221507 - F22
NEMA Type 4X Rating: all vents and door locks are deleted.
Options & Accessories:
Padlock Hasp comes standard
Enclosure is pole and wall mountable.
Back Panel is included.
The complete enclosure is made from 0.125” thick aluminum alloy type 5052-H32. Alternative material is 14-gauge type 304 stainless steel. Specifier must choose the material to be used.
0.125” aluminum back panel mounted on standoffs comes standard.
The door frame is double flanged on all four (4) sides. Flanges increase the strength of the door opening and help prevent dust and liquids from dropping into the enclosure when the door opened.
The standard door lock is two (2) quarter turn latches and a padlock hasp.
The continuous door hinge is 0.075” thick stainless steel with a 0.25” stainless steel pin. The hinge is attached with stainless steel carriage bolts.
The main door is sealed with closed -cell neoprene gasket.
Natural aluminum enclosures are mill finish per federal specification QQA-250/8.
Painted enclosures are treated with an iron phosphate coating and dried by radiant heat.