Single Door Enclosure
APXSM161208 - Non Traffic
Options & Accessories:
Screened Louvered Vents
Cabinet Lock with 2 Keys
Enclosure is pole and wall mountable.
Back Panel is included.
The complete enclosure is made from 0.125” thick aluminum alloy type 5052-H32 to provide a strong an rigid construction. Alternative material is 14 gauge type 304 stainless steel. Specifier must choose the material to be used.
A 0.125” aluminum back panel mounted on standoffs comes standard.
The door frame is double flanged on all four (4) sides. Flanges increase the strength of the door opening and help prevent dust and liquids from dropping into the enclosure when the door is open.
The standard door lock is Corbin #357SGS, or equal, and has a pivoting keyhole cover.
The continuous door hinge is 0.075” thick stainless steel with a 0.25” stainless steel pin. The hinge is attached with stainless steel carriage bolts.
The main door is sealed with closed-cell neoprene gasket.
Natural aluminum enclosures are mill finished per federal specification QQA-250/8.
Painted enclosures are treated with an iron phosphate coating and dried by radiant heat.