Quad Door Enclosure
NEMA Type 4X Rating: all vents and door locks are deleted.
Options & Accessories:
Custom Equipment Mounting
Rack Frame Assembly
The complete enclosure is made from 0.125″ thick aluminum alloy type 5052-H32 to provide a strong and rigid construction. Alternate material is 14 gauge type 304 stainless steel. Specifier must choose the material to be used.
The enclosure is equipped with two (2) adjustable “C” mounting channels on both side walls, providing versatile positioning of shelves, optional panels or rack mounting angles.
The door frame opening is double flanged on all four (4) sides. Flanges increase the strength of the door opening and help prevent dust and liquids from dropping into the enclosure when the doors are open.
Removable center posts are an integral part of the a three-point latching system and provide increased security and environmental protection.
All louver air intake vents on the door and air exhaust vents in the roof overhang are deleted.
All exterior seams are ground smooth or sealed weather-tight with silicone sealant.
The enclosure doors utilize an overlapping design and are equipped with a three-point latching mechanism with nylon rollers at the top and bottom.
The door handles are 0.75″ stainless steel round bar and have provisions for padlocks.
All through holes are sealed.
The main doors are sealed with closed-cell neoprene gasket.
The continuous door hinges are 0.075″ thick stainless steel with a 0.25″ stainless steel hinge pin.
Natural aluminum enclosures are mill finished per federal specification QQA-250/8.
Painted enclosures are treated with with an iron phosphate coating and dried by radiant heat.