Econoline Enclosures

APXEL362424

  • Options & Accessories:

    • Windows

    • Floor Stands

    • Paint Finishes

    • Panel, Painted Steel

    • Shelf

    • Sunshield

  • The complete enclosure is made from 0.125″ thick aluminum alloy type 5052-H32 to provide a strong and rigid construction.

  • The enclosure is equipped with 19″ rack rails, providing versatile positioning of equipment and ease of service. Optional panels or shelves may be added.

  • The door frame openings are flanged on all four (4) sides. Flanges increase the strength of the door openings and prevent dust and liquids from dropping into the enclosure when the doors are open.

  • All exterior seams are sealed weather-tight with silicone sealant.

  • All hardware is either stainless steel or aluminum.

  • All enclosure doors are equipped with a three-point latching mechanism with nylon rollers at the top and bottom.

  • Door handles are 0.75″ stainless steel round bar and have provisions for padlocks.

  • All doors are sealed with closed-cell neoprene gasket.

  • The continuous door hinge is 0.075″ thick stainless steel with a 0.25″ stainless hinge pin.

  • Natural aluminum enclosures are mill finished per federal specification QQA-250/8.

  • Painted enclosures are treated with an iron phosphate coat and dried by radiant heat. The standard coat is a baked polyester powder.

  • Enclosures can be pad or pole mounted. Pole mounted applications require the use of a heavy duty pole mounting kit.