Search  
 
   
  Communications Enclosures
   

Battery Cabinets
Econoline
Multi-Dwelling Unit
Rack Mounts
TCMC Modulars
TCMC Series

  Public Works Enclosures
    Large Single Door
Small Single Door
Double Door
Front/Rear Door
Quad Door
Lighting Control Cabinets
Pedestal
Power Utility & Backup Battery
Specline
  Traffic Enclosures
  Security Enclosures
  Custom Enclosures
  Options & Accessories
    Climate Control
Electrical
Hardware
Paint
  Build Your Own

APX NEMA 3R RACK MOUNT ENCLOSURES

SKU: Rack Mount

APX NEMA 3R RACK MOUNT ENCLOSURES

INDUSTRY STANDARD
UL Listed NEMA Certified Type 3R, 4X


STANDARD CONSTRUCTION

(See detailed specifications.)

A. ENCLOSURE
1. The complete enclosure is made from 0.125" thick aluminum alloy type 5052-H32 to provide a strong and rigid construction. Alernative material is 14 gauge type 304 stainless steel.(Specifier must choose the material to be used.)
2. Each enclosure is equipped with bracket provisions for rigid mounting of an optional EIA 19" rack frame assembly for mounting components. (Click here EIA rack specifications and catalog numbers.)
3. The door frame opening is double flanged on all four (4) sides. These flanges increase the strength of the door openings and help prevent dust and liquids from dropping into the enclosure when the doors are opened.
4. All exterior seams are ground smooth or sealed weathertight with silicone sealant.
5. Enclosures have provisions for mounting a forced air fan system that can be thermostatically controlled. Air is exhausted through a screened vent system in the enclosure top (3R only).

B. DOOR (Front-hinge on left, rear-hinge on right)
1. Equipped with a three-point latching mechanism with nylon rollers at the top and bottom.
2. Door handle is 0.75" stainless steel round bar and has provisions for a padlock.
3. The standard main door lock is Corbin #1548-1 or equal (3R only).
4. A louvered air vent with reuseable metal filter and retaining brackets is provided (3R only).
5. The main door is sealed with closed-cell neoprene gasket.
6. The continuous door hinge is 0.075" thick stainless steel with a 0.25" stainless hinge pin.

C.FINISH
1. Natural aluminum enclosures are mill finish per federal specification QQA-250/8.
2. Painted enclosures are treated with a iron phosphate coat and dried by radiant heat. The standard finish coat is baked polyester powder.

FOR NEMA TYPE 4X RATING:
DELETE: all vents and main door lock (Corbin #1548-1), and switch compartment asssembly.

ADD: all through holes are sealed.

DRAWING

OPTIONS:

APX Catalog Numbers: APX392420, APX462420, APX463026, APX553026, APX672430, APX672438 (Formerly TC392420, TC462420, TC463026, TC553026, TC672430, TC672438)



 

 

APX Enclosures, Inc.
200 Oregon Street, Mercersburg, PA 17236
Tel: 717-328-9399
 Email: info@apx-enclosures.com


Home    About Us    Products    Quality    Government    Engineering Specifications    Contact Us